Publication List for Sanjay Govindjee

    Refereed Publications: Archival Journals

  1. Mandadapu, K.K., Govindjee, S., and Mofrad, M.R.K., ``On the cytoskeleton and soft glassy rheology," Journal of Biomechanics, v41, 1467--1478 (2008).*

  2. Govindjee, S., Hackl, K., and Heinen, R, "An upper bound to the free energy of mixing by twin-compatible lamination for n-variant martensitic phase transformations", Continuum Mechanics and Thermodynamics, v18, 443-453 (2007).

  3. Hall, G.J., Govindjee, Sittner, P., and Novak, V., "Simulation of cubic to monoclinic-II transformations in a single crystal CuAlNi tube", International Journal of Plasticity, v23, 161-182 (2007).

  4. Nguyen, T.D., and Govindjee, S., "Numerical study of geometric constraint and cohesive parameters in steady-state viscoelastic crack growth", International Journal of Fracture, v141, 255-268 (2006).

  5. P.K. Vijalapura and Govindjee, S, ``An adaptive hybrid time-stepping scheme for highly nonlinear strongly coupled problems," International Journal for Numerical Methods in Engineering, v64, 819-848 (2005).*

  6. D.S. Bindel and Govindjee, S, ``Elastic PMLs for resonator anchor loss simulations," International Journal for Numerical Methods in Engineering, v64, 789-818 (2005).*

  7. S. Govindjee and Klinkel, S., ``Mechanical Coupling in Single Crystal Silicon for MEMS Design," IEEE Journal of Microelectromechanical Systems, v14, 864-871 (2005).

  8. Nguyen, T.D., Govindjee, S., Klein, P.A., and Gao, H., "A Material Force Method for Inelastic Fracture Mechanics," Journal of the Mechanics and Physics of Solids, v53, 91-121 (2005).

  9. Vijalapura, P.K., Strain, J.A., Govindjee, S., "Fractional step methods of index-1 differential-algebraic equations," Journal of Computational Physics, v203, 305-320 (2005).

  10. Taylor, RL and Govindjee, S., "Solution of clamped rectangular plates," Communications in Numerical Methods in Engineering, v20, 757-765 (2004). *

  11. Lowes LN. Moehle JR. Govindjee S., "Concrete-steel bond model for use in finite element modeling of reinforced concrete structures", ACI Structural Journal, v101, 501-511 (2004).

  12. Nguyen, T.D., Govindjee, S., Klein, P., Gao. H., "A rate-dependent cohesive continuum model for the study of crack dynamics", Computer Methods in Applied Mechanics and Engineering, v193, 3239-3265 (2004).

  13. Vijalapura, P.K. and Govindjee S., ``Numerical simulation of coupled-stress case II diffusion in one dimension," Journal of Polymer Science Part B: Polymer Physics, v41, 2091--2108 (2003).

  14. Klinkel, S. and Govindjee, S., ``Anisotropic Bending-Torsion Coupling for Warping in a Non-Linear Beam," Computational Mechanics, v31, 78-87 (2003). *

  15. Hall, G.J. & Govindjee, S., ``Application of the Relaxed Free Energy of Mixing to Problems in Shape Memory Alloy Simulation," Journal of Intelligent Material Systems Structures, v13, 773--782 (2002).

  16. Klinkel, S. and Govindjee, S., ``Using finite strain 3D-material models in beam and shell elements," Engineering Computations, v19, 902-921 (2002). An incorrect printing also appears on 254-271 of the same volume.

  17. Govindjee, S., Mielke, A., and Hall, G.J., ``The Free-Energy of Mixing for n-Variant Martensitic Phase Transformations using Quasi-Convex Analysis," Journal of the Mechanics and Physics of Solids, v51, 763+ (2003). [Incorrect version originally published in v50, 1897--1922 (2002)].*

  18. Govindjee, S. & Miehe, C., ``A Multi-Variant Martensitic Phase Transformation Model: Formulation and Numerical Implementation," Computer Methods in Applied Mechanics and Engineering, v191, 215-238 (2001).*

  19. Hall, G.J. & Govindjee, S., ``Application of a Paritally Relaxed Shape Memory Free Energy Function to Estimate the Phase Diagram and Predict Global Microstructure Evolution," Journal of the Mechanics and Physics of Solids, v50, 501-530 (2002).*

  20. Koishi, M. & Govindjee, S., ``Inverse Design Methodology of a Tire," Tire Science and Technology Journal, v29, 155-170 (2001).

  21. Falk, W. & Govindjee, S., ``Unilateral Buckling Restrained by Initial Force Supports," ASCE Journal of Engineering Mechanics, 126, 1301--1302 (2000).

  22. Govindjee, S. & Hall, G.J., ``A Computational Model for Shape Memory Alloys," International Journal of Solids and Structures, 37, 735-760 (2000).*

  23. Smeulders, S.B. & Govindjee, S., ``A Phenomenological Model of an Elastomer with an Evolving Molecular Weight Distribution," Journal of Rheology, 43, 393-414 (1999).*

  24. Govindjee, S. & Sackman, J.L., ``On the use of continuum mechanics to estimate the properties of nanotubes," Solid State Communications, 110, 227-230 (1999).*

  25. Govindjee, S. & Kasper, E.P., ``Computational Aspect of One-Dimensional Shape Memory Alloy Modeling with Phase Diagrams," Comp. Meth. Appl. Mech. Engng., 171, 309-326 (1999).*

  26. Govindjee, S. & Mihalic, P.A., ``Computational Methods for Inverse Deformations in Quasi-incompressible Finite Elasticity," Int. J. Numer. Meth. Engng., 43, 821-838 (1998).*

  27. Reese, S. & Govindjee, S., ``Theoretical and numerical aspects in the thermo-viscoelastic material behaviour of rubber-like polymers," Mechanics of Time-Dependent Materials, 1, 357-396 (1998).*

  28. Reese, S. & Govindjee, S., ``A Theory of Finite Viscoelasticity and Numerical Aspects," Int. J. Solids Structures, 35, 3455-3482 (1998).*

  29. Govindjee, S. & Kasper, E., ``A Shape Memory Alloy Model for Uranium-Niobium Accounting for Plasticity," J. Intelligent Mat. Sys. Struct., 8, 815-823 (1997).*

  30. Govindjee, S. & Reese, S., ``A Presentation and Comparison of Two Large Deformation Viscoelasticity Models," ASME J. Engng. Mat. Tech., 119, 251-255 (1997).

  31. Govindjee, S., ``An Evaluation of Strain Amplification Concepts via Monte-Carlo Simulations of an Ideal Composite," Rubber Chem. Technol., 70, 25-37 (1997).*

  32. Govindjee, S., ``Accuracy and Stability for Integration of Jaumann Stress Rate Equations in Spinning Bodies," Engng. Comp., 14, 14-30 (1997).*

  33. Govindjee, S. & Mihalic, P.A., ``Computational Methods for Inverse Finite Elastostatics," Comp. Meth. Appl. Mech. Engng., 136, 47-57 (1996).*

  34. Weiss, J.A., Maker, B.N., & Govindjee, S., ``Finite Element Implementation of Incompressible Transversely Isotropic Hyperelasticity," Comp. Meth. Appl. Mech. Engng., 135, 107-128 (1996).*

  35. Govindjee, S., Kay, G.J., & Simo, J.C., ``Anisotropic Modeling and Numerical Simulation of Brittle Damage in Concrete," Int. J. Numer. Meth. Engng., 38, 3611-3633 (1995).*

  36. Laursen, T.A. & Govindjee, S., ``A Note on the Treatment of Frictionless Contact Between Nonsmooth Surfaces in Fully Nonlinear Problems," Comm. Num. Meth. Eng., 10, 869-878 (1994).*

  37. Govindjee, S. & Simo, J.C., ``Coupled Stress--Diffusion: Case II," J. Mech. Phys. Solids, 41, 863-887 (1993).

  38. Govindjee, S. & Simo, J.C., ``Mullins' Effect and the Strain Amplitude Dependence of the Storage Modulus," Int. J. Solids Struc., 29, 1737-1751 (1992).

  39. Govindjee, S. & Simo, J.C., ``Transition from Micro-Mechanics to Computationally Efficient Phenomenology: Carbon Black Filled Rubbers Incorporating Mullins' Effect," J. Mech. Phys. Sol., 40, 213-233 (1992).

  40. Govindjee, S. & Simo, J.C., ``A Micro-Mechanically Based Continuum Damage Model for Carbon Black Filled Rubbers Incorporating Mullins' Effect," J. Mech. Phys. Sol., 39, 87-112 (1991).

  41. Simo, J.C. & Govindjee, S., ``Non-Linear B-Stability and Symmetry Preserving Return Mapping Algorithms for Plasticity and Viscoplasticity," Int. J. Num. Meth. Eng., 31, 151-176 (1991).

  42. Simo, J.C. & Govindjee, S., ``Exact Closed-Form Solution of the Return Mapping Algorithm in Plane Stress Elasto-Viscoplasticity," Eng. Comp., 5, 254-258 (1988).

  43. Simo, J.C., Kennedy, J.G., & Govindjee, S., ``Non-Smooth Multisurface Plasticity and Viscoplasticity. Loading/Unloading Conditions and Numerical Algorithms," Int. J. Num. Meth. Eng., 26, 2161-2185 (1988).
    * -- Previously appeared as a non-refereed technical report.

    Refereed Publications: Conference and Symposium Proceedings

  44. Garmire, D, Choo, H., Kant, R., Govindjee, S., Sequin, C.H., Muller, R.S., and Demmel, J., ``Diamagnetically levitated MEMS accelerometers," 14th International Conference on Solid-State Sensors, Actuators and Microsystems, Transducers 2007 \& Eurosensors XXI, Lyon France, vol 1 and 2, U606-U607 (June 2007).

  45. D. Garmire, H. Choo, R. S. Muller, S. Govindjee, and J. Demmel. "MEMS Process Characterization with an on-Chip Device." Nanotech 2006, The Technical Proceedings of the Nano Science and Technology Institute, vol 3, 550-553, Boston, MA, (May 2006).

  46. Koyama, T., Bindel, D.S., Wei, H., Qu\'evy, E.P., Govindjee, S., Demmel, J.W., and Howe, R.T., ``Simulation tools for damping in high frequency resonators," 4th IEEE Conference on Sensors, Irvine, CA, 349-352, (October 2005).

  47. Bindel, D.S., Quevy, E., Koyama, T., Govindjee, S., Demmel, J.W., and Howe, R.T., ``Anchor Loss Simulation in Resonators," MEMS 2005, IEEE international conference, Miami, FL 133-136 (January 2005).

  48. Clark, J.V., Bindel, Kao, W., Zhu, E., Kuo, A., Zhou, N., Nie, J., Demmel, J., Bai, Z., Govindjee, S., Pister, K.S.J., Gu, M., Agogino, A., ``Addressing the needs of complex MEMS design," MEMS 2002, IEEE international conference, Las Vegas, NV (January 2002).

  49. Long, F., Govindjee, S., & Monosmith, C.L., ``Permanent deformation of asphalt concrete pavements --- development of a nonlinear viscoelastic model for mix design and analyses," Proceedings 9th International Conference on Asphalt Pavements, Copenhagen, Denmark (August 2002) (to appear).

  50. Govindjee, S, ``Finite Deformation Energy Release Rate Computations in a Steady Rolling Tire," Proceedings of the Tenth International Congress of Fracture, Honolulu, HI (December 2001).

  51. Lowes, L., Govindjee, S., & Moehle, J., ``Analysis of Reinforced Concrete Beam-Column Joints," Proceedings of the Sixth National Conference on Earthquake Engineering, Seattle, WA (May 1998).

  52. Puso, M. & Govindjee, S., ``A Phenomenological Constitutive Model for Rigid Polymeric Foam," in Mechanics of Plastics and Plastic Composites 1995}, Ed. Boyce, M.C., MD-Vol. 68, AMD-Vol. 88, ASME Press, New York, 159-176 (1995).

  53. Simo, J.C. & Govindjee, S., ``Exact Closed-Form Return Mapping Algorithms in Plane Stress Elasto-Viscoplasticity," in Elastic-Plastic Failure Modeling of Structures With Applications, Eds. Hui, D. & Kozik, T. J., PVP-Vol. 141, ASME Press, New York, 37-41 (1988).

  54. Simo, J.C., Kennedy, J.G., & Govindjee, S., ``Multisurface Plasticity and Viscoplasticity With Non-Smooth Intersection," in Elastic-Plastic Failure Modeling of Structures With Applications, Eds. Hui, D. & Kozik, T. J., PVP-Vol. 141, ASME Press, New York, 43-47 (1988).

  55. Simo, J.C., Kennedy, J.G, Govindjee, S., & Hughes, T.J.R., ``Unconditionally Convergent Algorithms for Non-Smooth Multisurface Plasticity Amenable to Exact Linearization," in Advances in Inelastic Analysis, Eds. Nakazawa, S., Williams, K., & Rebello, N., AMD-Vol. 88, ASME Press, New York, 87-95 (1987).

    Non-Refereed Publications: Technical Reports

  56. Govindjee, S., ``Stability Analysis of Bay Bridge Saddle Configuration," UCB/SEMM-2009/03, University of California Berkeley (2009).

  57. He, W. and Govindjee, S., ``Application of aSymplectic-Energy-Momentum Preserving Integrator to Molecular Dynamics," UCB/SEMM-2009/01, University of California Berkeley (2009).

  58. Koyama, T. and Govindjee, S., ``Moment Matching Theorems for Dimension Reduction of Higher-Order Dynamical Systems via Higher-Order Krylov Subspaces," UCB/SEMM-2008/04, University of California Berkeley (2008).

  59. Kiran, K. and Govindjee, S. and Mofrad, M.R.K., ``Soft Glassy Rheology and Cytoskeletal Mechanics," ETH/ZfM-2007/01, ETH Zurich (2007).**

  60. Vijalapura, P.K. and Govindjee, S., ``An Adaptive Hybrid Time-Stepping Scheme for Highly Nonlinear Strongly Coupled Problems," UCB/SEMM-2005/02, University of California Berkeley (2005).

  61. Bindel, D.S. and Govindjee, S., ``Elastic PMLs for resonator anchor loss simulation," UCB/SEMM-2005/01, University of California Berkeley (2005).

  62. Vijalapura, P.K. and Govindjee, S., "1-D Diffusion Deformation Phenomena: Accuracy Analysis of Operator Splitting," UCB/SEMM-2003/06, University of California Berkeley (2003).

  63. Taylor, R. L. and Govindjee, S., ``A Quadratic Linked Plate Element with an Exact Thin Plate Limit ," UCB/SEMM-2002/10, University of California Berkeley (2002).

  64. Taylor, R. L. and Govindjee, S., ``Solution of Clamped Rectangular Plate Problems," UCB/SEMM-2002/09, University of California Berkeley (2002). **

  65. Klinkel, S. and Govindjee, S., ``Anisotropic Bending-Torsion Coupling for Warping in a Non-Linear Beam," UCB/SEMM-2002/04, University of California Berkeley (2002). **

  66. Govindjee, S., Mielke, A., and Hall, G.J., ``The Free-Energy of Mixing for n-Variant Martensitic Phase Transformations using Quasi-Convex Analysis," UCB/SEMM-2001/04, University of California Berkeley (2001).**

  67. Govindjee, S., ``Firestone Tire Failure Analysis" Lafayette, CA, January 2001, 73 pages.
    18MB version with high resolution graphics
    1MB version with optimized graphics

  68. Hall, G.J. & Govindjee, S., ``Application of a Paritally Relaxed Shape Memory Free Energy Function to Bound the Phase Diagram and Predict Global Microstructure Evolution," UCB/SEMM-2000/09, University of California Berkeley (2000).**

  69. Govindjee, S. & Miehe, C., ``A Multi-Variant Martensitic Phase Transformation Model: Formulation and Numerical Implementation," UCB/SEMM-2000/06, University of California Berkeley (2000).**

  70. Hall, G.J. & Govindjee, S., ``A Model and Numerical Framework for the Simulation of Solid-Solid Phase Transformations," UCB/SEMM-1999/11, University of California Berkeley (1999).

  71. Falk, W.M. & Govindjee, S., ``Towards an Understanding of the Observed Buckling Modes of Reinforcing Bars in Concrete Columns," UCB/SEMM-1999/10, University of California Berkeley (1999).

  72. Govindjee, S., ``Finite Deformation Inverse Design Modeling with Temperature Changes, Axis-Symmetry and Anisotropy," UCB/SEMM-1999/01, University of California Berkeley (1999).

  73. Govindjee, S. & Hall, G.J., ``A Computational Model for Shape Memory Alloys," UCB/SEMM-98/10, University of California Berkeley (1998).**

  74. Smeulders, S.B. & Govindjee, S., ``A Phenomenological Model of an Elastomer with an Evolving Molecular Weight Distribution," UCB/SEMM-98/09, University of California Berkeley (1998).**

  75. Smeulders, S.B. & Govindjee, S., ``A Constrained Downhill-Simplex Method for Stress-Strain Data Fitting," UCB/SEMM-98/07, University of California Berkeley (1998).

  76. Govindjee, S. & Kasper, E.P., ``Computational Aspect of One-Dimensional Shape Memory Alloy Modeling with Phase Diagrams," UCB/SEMM-98/03, University of California Berkeley (1998).**

  77. Govindjee, S. & Mihalic, P.A., ``Viscoelastic Constitutive Relations for the Steady Spinning of a Cylinder," UCB/SEMM-98/02, University of California Berkeley (1998).

  78. Govindjee, S. & Hall, G., ``A Local Integration Method for Coupled Damage and Plasticity," UCB/SEMM-98/01, University of California Berkeley (1998).

  79. Govindjee, S. & Sackman, J.L., ``On the use of continuum mechanics to estimate the properties of nanotubes," UCB/SEMM-97/16, University of California Berkeley (1997).**

  80. Govindjee, S. & Kasper, E., ``A Shape Memory Alloy Model for Uranium-Niobium Accounting for Plasticity," UCB/SEMM-97/06, University of California Berkeley (1997).**

  81. Govindjee, S. & Mihalic, P.A., ``Computational Methods for Inverse Deformations in Quasi-incompressible Finite Elasticity," UCB/SEMM-97/01, University of California Berkeley (1997).**

  82. Reese, S. & Govindjee, S., ``Theoretical and numerical aspects in the thermo-viscoelastic material behaviour of rubber-like polymers," Bericht Nr. 1/97, Institut fuer Mechanik, TH Darmstadt, January 1997.**

  83. Govindjee, S., ``An Evaluation of Strain Amplification Concepts via Monte-Carlo Simulations of an Ideal Composite," UCB/SEMM-96/09, University of California Berkeley (1996).**

  84. Reese, S. & Govindjee, S., ``A Theory of Finite Viscoelasticity and Numerical Aspects," UCB/SEMM-96/08, University of California Berkeley, August 1996.**

  85. Govindjee, S., ``Accuracy and Stability for Integration of Jaumann Stress Rate Equations in Spinning Bodies," UCB/SEMM-95/10, University of California Berkeley (1995).**

  86. Weiss, J.A., Maker, B.N., & Govindjee, S., ``Finite Element Implementation of Incompressible Transversely Isotropic Hyperelasticity," UCB/SEMM-95/07, University of California Berkeley (1995).**

  87. Govindjee, S. & Mihalic, P.A., ``Computational Methods for Inverse Finite Elastostatics," UCB/SEMM-95/01, University of California Berkeley (1995).**

  88. Govindjee, S., Kay, G.J., & Simo, J.C., ``Anisotropic Modeling and Numerical Simulation of Brittle Damage in Concrete," UCB/SEMM-94/18, University of California Berkeley (1994).**

  89. Laursen, T.A. & Govindjee, S., ``A Note on the Treatment of Frictionless Contact Between Nonsmooth Surfaces in Fully Nonlinear Problems," UCRL-JC-114843, University of California, Lawrence Livermore National Laboratory (1993).**

  90. Govindjee, S., ``The Wave, the Cylinder, and the Plate," UCRL-ID-111489, University of California, Lawrence Livermore National Laboratory (1992).

  91. Govindjee, S. and Kay, G.J., ``Reinforced Concrete Damage Modeling," Engineering Research Development and Technology, Lawrence Livermore National Laboratory, Thrust Area Report FY92, UCRL-53868-92, pp. 2-1 to 2-4 (1992).

  92. Govindjee, S., ``Physical and Numerical Modeling in Filled Elastomeric Systems," Ph.D. Dissertation, Stanford University, Stanford, CA, July 1991, 155 pages.
    ** -- Now appears as a refereed archival journal article

    Non-Refereed Publications: Conference and Symposium Proceedings

  93. Koyama, T. and Govindjee, S., ``A geometric multigrid preconditioner for solving time-harmonic elastodynamics on unbounded domains with perfectly matched layers," in Proceedings COMPDYN09, 2nd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, CD420 1--12 (2009).
  94. Koyama, T. and Govindjee, S., ``Solving generalized complex-symmetriceigenvalue problems arising fromresonant MEMS simulations with PETSc," in Proceedings in AppliedMathematics and Mechanics, 1141701-1141702 (2008).
  95. Kiran, K., Govindjee, S., and Mohammad, MRK., ``On the cytoskeleton and soft glassy rheology," in Proceedings of the 2007 Summer Bioengineering Conference, 279-280 (2007).

  96. Clark, J.V., Garmire, D., Last, M., Demmel, J., and Govindjee, S., ``Practical techniques for measureing MEMS properties," in Technical Proceedings NSTI Nanotech 2004, vol 1, 402-405 (2004).

  97. Govindjee, S., ``Finite Deformation Fracture of Tires," in Solid Mechanics and Its Applications: IUTAM Symposium on Computational Mechanics of Solid Materials at Large Strains, (2002).

  98. Govindjee, S. \& Hall, G.J., ``Computational aspects of solid-solid phase transformation modeling with a Gibbs functions," in Smart Structures and Materials 1999: Mathematics and Control in Smart Structures, Vasundara V. Varadan, Editor, Proceedings of SPIE Vol. 3667, 302-313 (1999).

  99. Govindjee, S. & Kasper, E.P., ``Computational Aspects and Applications of One-Dimensional Shape Memory Alloy Modeling," Proceedings ASCE Engineering Mechanics Conference, San Diego, CA, 1070-1073, (1998).

  100. Naito, C., Lowes, L., Moehle, J., & Govindjee, S., ``Design of Innovative Reinforced Concrete Beam-Column Joints," Proceedings of the Second National Seismic Conference on Bridges and Highways, Sacramento, CA (July 1997).

  101. Kay, G.J., Govindjee, S., Laursen, T.A., & Maker, B., ``Development of Concrete Tensile Fracture and Concrete/Rebar Bond Strength Models," in Fracture Mechanics of Concrete Structures, Ed. Bazant, Z.P., Elsevier Applied Science, London, 849-852 (1992).

    Non-Refereed Publications: Book Chapters

  102. Govindjee, S., ``Numerical Issues in Finite Elasticity and Viscoelasticity," in Mechanics and Thermomechanics of Rubberlike Solids, Ed. G. Saccomandi & R.W. Ogden, Springer-Verlang, Wein-New York, 187-232 (2004).

    Patents

  103. Garmire, D., Choo, H., Muller, R.S., Demmel, J., and Govindjee, S., `` `Integrated MEMS Metrology Device Using Complementary Measuring Combs," Patent Number: WO2007124357-A2, Derwent Primary Accession Number: 2007-872567 [80].